Screen printed electrode adapter for hyper value electrodes

This is an adapter configured for use with a ZP Hypervalue screen printed electrode or any other similarly sized and configured screen-printed electrode.

The adapter contains a 3-position card edge connector with 0.1" spacing mounted inside a 3D-printed enclosure. The electrode is inserted into a 7.8 mm x 1.0 mm slot on the front of the adapter. An internal tab in the 3D-printed part ensures the electrode is held firmly in place within the card-edge connector. The adapter connects to the Rodeostat potentiostat via a 12" long 3-pin cable.

• Electrode spacing: 0.1"
• Electrode configuration: C/W/R
• Electrode slot width: 7.8 mm 
• Example of compatible electrodes: ZP Hypervalue carbon screen printed electrodes

Open hardware design files for the 3D-printed adapter: https://github.com/iorodeo/zp-spe-adapter.