This is an adapter configured for use with any electrode or biosensor with the following configuration:
Electrode configuration: W/C/R
Electrode pad spacing: 0.1"
The adapter contains a 3-position card edge connector with 0.1" spacing mounted inside a 3D-printed enclosure. An internal tab in the adapter secures the electrode firmly in place. The adapter connects to the Rodeostat potentiostat 3-pin header via a 12" long cable.
An electrode or biosensor is inserted into a slot on the front of the adapter. There are 3 slot width versions available to accommodate different electrode sizes.
5.5 x 1 mm
7.5 x 1 mm
10 x 1 mm (max width)
Learn more about this product and our other Rodeostat SPE adapters in the Rodestat Product Guide.
