Rodeostat SPE adapter: Type B/CWR

This is an adapter configured for use with any electrode or biosensor with the following configuration:

• Electrode configuration: C/W/R (Counter/Working/Reference)
• Electrode pad spacing: 0.1"

The adapter contains a 3-position card edge connector with 0.1" spacing mounted inside a 3D-printed enclosure.  An internal tab in the adapter secures the electrode firmly in place. The adapter connects to the Rodeostat potentiostat 3-pin header via a 12" long cable.

An electrode or biosensor is inserted into a slot on the front of the adapter. There are 3 slot width versions available to accommodate different electrode sizes. 

• 5.5 x 1 mm
• 7.5 x 1 mm (used for ZP Hypervalue electrodes)
• 10 x 1 mm

Learn more about this product and our other Rodeostat SPE adapters in the Rodestat Product Guide.

Example application

Select the 7.5 mm slot width for the Zimmer & Peacock Hypervalue Electrodes. 

Open hardware design files:

• Freecad design: 3D-printed adapter housing
• KiCad PCB design: SPE adapter CWR